Feature
Sliding headstock automatic lathe MANURHIN K‘MX 816 CLEVER is designed for productive machining of parts from the bars of maximum diameter 16 mm (*20 mm)
Machine is equipped in standard with two electro spindles with maximum speed12 000 rpm each and with rotary guide bush synchronized by pulleys and belts with main spindle. Eight linear CNC axes (X1, X2, Y1, Y2, Y3, Z1, Z2, Z3) and two rotary axes (C1, C2) enable to machine with high productivity the simple as well as complex parts.
Machine is equipped with powered tools on both independent cross slides beside the guide bush, it means that parallel surfaces can be simultaneously milled or the holes against each other can be radially drilled. Axial tool rack is also equipped with powered tools, allowing for example eccentric drilling. Spindle stroke allows turning up to 220 mm long parts on one clamping
Advantage
Machine is typically delivered with automatic bar feeder with encoder and magazine for 3 m bars. The parts over 160 mm long are possible to be evacuated from the machine only through the counter spindle. The maximum length of the part is limited theoretically only by the length of the bar.
The easy setup of tools on tool rack enables the successful use of this machine for the batches starting by hundreds of pieces.
